Pond Aerator | 1/2 HP Pump | Pond Aeration Cabinet System | 1 Diffuser | 100′ of Weighted Hose

$1,475.00

SKU: CMS115-12-1D-1H Category: Brand:

Description

This pond aerator system can properly aerate a 2 acre pond with diffuser set at a minimum of 15 feet.

Pond aeration cabinet system comes ready for use. Hook up diffuser airlines to pond aerator airlines and plug it in! Comes with a powerful 1/2 HP double-piston aeration pump, industrial grade exhaust fan designed to deal with extreme heat and moisture, and an easy disconnect manifold.

Excellent pond aerator pump:

  • Pond Aerator Pump System With Industry Best – Three Year Warranty On All Components!
  • Designed to run 24/7
  • Oil-less, non-lube piston and cylinder
  • Piston cylinder is hard coated for wear resistance
  • Piston head design allows for easy replacement of piston seal for routine maintenance
  • Permanently lubricated bearings
  • Pond aerator balanced for smooth, low vibration operation
  • Safety Protected

The pond aeration system includes an easy disconnect manifold assembly with two 3/8″ ball valves and a pressure relief valve to protect your aerator pump. Just hook up your diffuser to the aeration system and plug it in.

  • Powder-coated cabinet
  • 115-volt system
  • Air filter assembly to protect aerator from debris
  • Pre-set pressure relief valve to protect pond aerator pump from being overworked
  • 6 ft. power cord
  • Locking latch
  • High performance cooling fan to keep pond aerator from overheating

Top of the line diffuserAeration Central’s Diffuser enclosed airline system:

  • Diffuser base is a 16″ molded, enclosed system
  • The 12″ diffuser head, with a compound formulation and molding technique, ensures the diffuser membrane maintains its physical properties over a long period of time
  • High performance synthetic rubber membrane designed to resist tearing and retain shape even after years of continuous or cyclical use
  • Rubber membrane to limit build up on diffuser, eliminating the need to pull diffuser and clean surface to maintain performance
  • The diffuser base has a large opening for easy filling
  • Molded installation holes for strings for easy placement of diffuser
  • Diffuser produces highly desirable micro bubbles, which maximizes water movement
  • Comes with barbed 1/2″ PVC fitting for hose and hose clamp

Weighted hose

  • Heavy duty, high quality, durable weighted hose
  • Weighted hose has an inside diameter of 1/2″ and outside diameter of 1″
  • Sinks and remains in place
  • Holds up to UV rays, heat, and cold
  • Withstands heavy traffic
  • Hose connectors and clamps included

Installation services available in certain locations.

Additional information

Weight 62 lbs
Dimensions 21 × 17 × 15 in
Skip to content